TIG Welding Gloves Produced from a
variety of fine leathers, Guard-Line's Tig welding gloves are
specifically designed to provide adequate protection without
sacrificing the high degree of sensitivity and touch precision
Tig welding requires. Unlined to maximize dexterity, gloves
are sized from small to extra large for just the right fit and
feel. All styles come in either 2" safety cuff or 4"
gauntlet design.
QUICKLINKS
TIG Welding Gloves
Welding Gloves
 |
 |
TIG100
Gunn pattern with straight thumb. Made from lightweight
split deerskin. 4" standard cuff. Also avail-able
with 2" safety cuff (TIG200SC).
Top |
 |
|
TIG200
Same as TIG100 except made from lightweight capeskin.
4" standard cuff. Also with 2" safety cuff (TIG200SC).
Top |
 |
|
TIG300
Same as TIG100 and TIG200 except made from grain pigskin.
4" std. cuff. Also with 2" safety cuff (TIG300SC).
Top |
 |
|
TIG100CDGC
Same as TIG100, TIG200 and TIG300 except made from split
deerskin that has been tanned to reduce the natural shedding
and flaking of the leather. This process prevents the
possibility of contaminating the weld. Also with 2"
safety cuff (TIG100CDGCSC).
Top |
 |
|
BB25
Blue Blazer's distinctive bright blue color is a Guard-Line
original and is the symbol of excellence in high perform-ance
welding gloves. Large cut, in the welder preferred gunn
pattern with one piece back, heat resistant select side
split cowhide, BB25 is a full 14" long for an extra
margin of protection, has fully welted seams sewn with
Kevlar® thread for exceptional durability, and has
a full sock liner for wearer comfort
Top |
 |
|
2
Gunn pattern, one piece back, wing thumb with welted seams,
full sock liner, bucktan color with pearl inside cuff,
14" length.
Top |
 |
|
15
For years the industry's standard in welding glove design.
Pearl side split cowhide, one piece back, wing thumb,
sock liner, welted vulnerable seams, large cut, 14"
length.
Top |
 |
|
30
One finger mitten, fully lined, large cut, 14" length.
Top |
 |
|
T101
Gunn pattern, one piece back, wing thumb, welted seams
including fingertips. Sock liner, large cut, 14"
length.
Top |
 |
|
T106
Reversible clute cut bucktan welders glove. Can be worn
on either hand.
Top |
 |
|
L2100
The same high standards as our BB-25 except designed especially
for the female welder.
Top |
 |
|
750
Gunn pattern, straight thumb with thumb strap and pull
tab. Unlined palm, made from reverse grain cowhide. Foam
lined back with heavy weight split elkskin outer shell.
Sizes medium and large.
Top |
 |
|
1750
Gunn pattern welding glove, split elkskin,straight thumb
with thumb strap and pull tab. Full sock liner, turned
down hem. 14" length, large cut.
Top |
 |
|
155CFX
Our economy welder, two piece back with unlined cufflex
cuff.
Top |
|
|
|